Get that new Headlight Guard on your T7!

The large, rally styled headlight on the Yamaha Tenere 700 is impressively bright, but easily picks up dings and damage from thrown rocks while riding off-road. Protect the expensive and vulnerable headlight lens on your Yamaha 700 with this quick-release headlight guard from Touratech.

The headlight guard clips on and off the bike quickly and easily without tools so you can clean your headlight between rides and keep the light shining bright. The stylish laser-cut front grill allows light to pass through but is robust enough to block stones, dirt clods, and debris.

For the full line of Tenere 700 parts go here!

TRANSCRIPTION:

Hello, Iain here with Touratech-USA and today we are coming from my backyard because it’s a beautiful day in the Pacific Northwest and we’re going to be working on this brand new Yamaha T7. We’re going to install the headlight guard. This is your instructional video on how to install it. Let’s get started.

As with all of the Touratech headlight guard installations, I personally like to start on the work bench. So I’ll install the female quick release rubber cups into these two anodized aluminum side brackets and then I’ll install the male quick release parts into the laser cut mesh here. So the male pieces go here, obviously with the posts pointing this way and the female sides, see how they’ve got this bend in them right here. The rubber pieces go in from this side, so when it rests on the motorcycle, you can put the male pieces in. It’ll all make sense in a minute.

Also, highly recommend getting the instructions downloaded off the Touratech website. You can just view them on your phone. PDFs make it really easy to see what goes where.

To install the male side, quick release components, all you need are the four button head M6 bolts, the four male quick release pieces and then the four M6 small washers. You do not need to apply Loctite onto these pieces because if you look inside the threads here, there’s actually a pinched thread down there and that works as a mechanical thread locker.

So, you just take the bolt, take the washer, put them through the guard from the front and then thread this guy on the backside.

I’m just going to get all four of them started and then I’ll put a tool on them and tighten them all down. To tighten these up the rest of the way, you’re going to use a four millimeter Allen wrench and an 11 millimeter Spanner wrench.

Now, we’re going to take the four rubber female quick release pieces and we’re going to install them here into these brackets. If you look at the bracket, you’ll see that these tabs here with the larger diameter holes are bent at an angle. Just imagine that the bracket is totally flat to you and the angle is bending away from you. That’s how we’re going to push these things in from the front and all you do is just push them through and just use your thumb and pop them right in there and they’re barbed. It’s quite easy.

Okay. Quick release components are assembled. Now we’re ready to walk over the bike. We’re going to need the brackets, the four spacers, four M5 washers and the four and five bolts.

Okay, here at the bike, we need to pull off one, two, three, four; these bolts from the factory. These are held on with an Allen wrench. Looks like a four millimeter fastener. We’ll just pop those four out.

Installing the mounting brackets for the Touratech Headlight guard are quite easy once these bolts are out. You just take the long bolts here, the M5s, drop them. They’re all the same length, so just drop them through the bracket. Take two of the black plastic spacers that are also all the same length and put them into the holes and just screw them in gently. Same thing on both sides.

When you got the brackets tightened down on both sides, there’s a little bit of flexibility here, cause they’re just rubber mounted. So all you got to do is lineup headlight guard, press it on. It’s that easy. Headlight guards mounted. It looks great.

TOURATECH USA

The large, aggressively styled headlight on the KTM 790 Adventure or Adventure R is impressively bright, but easily picks up dings and damage from thrown rocks while riding off-road. Protect the expensive and vulnerable headlight lens on your KTM 790 with this quick-release headlight guard from Touratech.

The headlight guard clips on and off the bike quickly and easily without tools so you can clean your headlight between rides and keep the light shining bright. The stylish laser-cut front grill allows light to pass through but is robust enough to block stones, dirt clods, and debris.

Check out our full line of upgrades for the KTM 790 ADV/R

The large, aggressively styled headlight on the KTM 1290 is impressively bright, but easily picks up dings and damage from thrown rocks while riding off-road.  Protect the expensive and vulnerable headlight lens on your KTM Super Adventure R or S with this quick-release headlight guard from Touratech.

The headlight guard clips on and off the bike quickly and easily without tools so you can clean your headlight between rides and keep the light shining bright.  The stylish laser-cut front grill allows light to pass through but is robust enough to block stones, dirt clods, and debris.

Touratech-USA

One thrown rock from another motorcycle or a passing semi-truck and it’s lights-out on your adventure. Protect your expensive KTM 1190 or 1290 headlight assembly with a strong laser-cut stainless steel grid. The design accents the unique styling of the 1290, 1190 Adventure or Adventure R and looks great with a black powder coated finish. The mounting brackets are available in black or KTM orange.

This quick-release headlight guard for the KTM 1290, 1190 Adventure or ADV R removes instantly for easy access to clean dust or dirt off the headlight assembly to maximize light output.

NOTE: Not for 2017 and newer 1290 Super Adventure.

TOURATECH-USA